Description
TekniClean ESD Safe Microfiber Cleanroom Wipe with Ultrasonic Sealed Borders, 1500/case
ESD Safe Static Shield Bag packaging for sensitive environments!
- Tightly knit, 100g/m2 pre-shrunk mixed weave microfiber (30% Nylon, 70% Polyester) has a high holding capacity that traps micro-contaminant and won't release them.
- Silky soft texture that will not scratch sensitive surfaces. Border sealed edges virtually eliminate fiber release.
- for the ultimate in fiber and particle control. Using pressure & heat, a 5mm seal is created around the border of the wipe for optimum fiber and particle retention.
- Highly durable and abrasion resistant. Ideal for difficult particle removal and works well for removing water and oil based contaminants. Handles IPA and other cleaning solvents.
- Static Shield packaging with an easy to use ziplock seal eliminates "hot" packaging & resulting tribocharge while maintaining traceability & product integrity in ESD sensitive environments.
- Compatible with ISO Class 4-5 (Class 10-100) environments.
- Produced in ISO 9001 environment. Statistical Process Control (13 measurement points) is utilized insure wipe quality.
- Size: 9" x 9".
- Packaged 100 wipes per static shield bag (2 inner bags of 50), 15 bags per case = 1500 mixed weave microfiber cleanroom wipers.
Common Applications:
- Process cleaning, process tool chambers; optical, LCD, and hard disk cleaning; removing water and oil based contaminants, removing difficult particles from critical surfaces and equipment to achieve ultra cleanliness.
TekniClean Mixed Weave Microfiber Wipe Technical Spec Sheet.
Teknipure Wipe Cross-Reference Guide.
Teknipure# TC3MBWS-99
What are the Types of Cleanroom Wipe Border/Edge Seals?
Cleanroom Wipers have sealed edges to prevent particle and fiber generation and provide a clean wipe. Cleanroom wipes can have a sealed border, a sealed edge, or a cut edge. The level of fiber and particle release will depend on your wipe seal. Note the difference in sealing the border around the wipe (most clean) or just the wipe edge (most common).
Cleanroom Class 1-10 (ISO 3-4): Sealed Border
Sealed Border wipers are the cleanest & best performing choice for your most critical tasks. Maximum cleanliness and fiber control.
A proprietary process using pressure & heat is used to create a border seal for optimum fiber and particle retention, resulting in a 5mm Ultrasonic Border Seal around the border of the wipe. The most rigorous washing and border sealing process for applications requiring maximum particle and fiber retention.
Cleanroom Class 10-100 (ISO 4-5): Sealed Edge
Sealed Edge wipers are exceptionally clean and a common critical task wiper. The difference over border seals is that only the edging of the wipe is sealed instead of a border around the edge of the wipe. A Laser Sealed Edge is provided on all sides for maximum fiber and particle retention. A Ultrasonic Sealed Edge involves a process using pressure & heat to create an ultrasonic seal for fiber and particle retention. Ultrasonic Sealing is superior to Laser Sealing as it results in a softer edge, and lower carbon levels. Soft sealed edges retain all fiber in scratch sensitive applications.
Cleanroom Class 100-10,000 (ISO 5-7): Hot Knife or Laser Sealed Edge
Knit (Woven) Wipers
Light weight with a Laser Sealed Edge to provide effective contamination control in critical environments and offer the best value. Low levels of contamination and superb particle removal and retention make this the ideal wiper where economical and effective cleaning is required. Most economical critical use knit wipers.
Non-Woven Wipers
Excellent absorbency and particle removal in controlled environments. Commonly used in many general cleaning applications. Higher levels of fiber and contaminants than knit wipers. Excellent choice for economical cleaning & spill pick-up, and wrapping controlled surfaces. These non-woven wipers have Hot Knife Sealed Edges.
This edge type is intended for high-volume and large size applications.
Don't see your question answered?
Click here and submit your question and we will get back to you shortly with an answer.
